6. Operation Panel Switch Functions
6.15 Handle Interruption
II - 30
G42
G40
Program path
Tool path
Locus after interruption
Distance of interruption by
manual handle
Path after interruption
(Absolute value mode, program absolute
value update valid, continuous operation)
6.15.7 Interrupt Amount Reset
Interrupt amount is reset when
(1) dog reference position return is executed;
(2) emergency stop is released;
(3) reset rewind or reset 2 is executed; or
(4) reset 1 is executed when the interrupt amount
reset parameter is ON
To Next Page
Loading...
