Appendix 2. List of Function Codes
IV - 14
Appendix 2. List of Function Codes
Function
code
ISO
Significance
in control
unit
Screen
display
Setting and
display unit
key in
Save in
memory
Function in control unit
0 to 9 Significant Displayed Key in enabled Saved Value data
A to Z Significant Displayed Key in enabled Saved Address
+ Significant Displayed Key in enabled Saved Sign, variable operator (+)
– Significant Displayed Key in enabled Saved Sign, variable operator (–)
.
Significant Displayed Key in enabled Saved Decimal point
, Significant Displayed Key in enabled Saved
/ Significant Displayed Key in enabled Saved
Block delete (optional block skip)
variable operator (¸)
% Significant
Displayed
(%)
Key in
disabled
(automatic
insertion)
Saved End of record
LF/NL Significant
Displayed
(;)
Key in enabled
;/EOB
Saved End of block
(
Significant Displayed
Key in enabled
;/EOB
Saved Control out (comment start)
)
Significant Displayed
Key in enabled
;/EOB
Saved Control in (commend end)
: Significant Displayed Key in disabled Saved
Program No. address (Substitute
for 0)
# Significant Displayed Key in enabled Saved Variable No.
* Significant Displayed Key in enabled Saved Variable operator (×)
= Significant Displayed Key in enabled Saved Variable definition
[ Significant Displayed Key in enabled Saved Variable operator
] Significant Displayed Key in enabled Saved Variable operator
BS Insignificant Blank Key in disabled Saved
HT Insignificant Blank Key in disabled Saved
SP Insignificant Blank Key in enabled Saved
CR Insignificant Blank Key in disabled Saved
DEL Insignificant
Do not
display
Key in disabled Do not save
NULL Insignificant
Do not
display
Key in disabled Do not save
Other than
the above
Insignificant (Note 2) Key in disabled Saved
(Note 1) Codes not shown above (except comments) will cause an error during operation.
(Note 2) The internally saved characters (including blank) that correspond to the command codes are
displayed. Note that @ is not displayed.
To Next Page
Loading...
Need help?
General
