Mitsubishi C70

2. CNC Monitor Screen
2.7 Diagnosis
I - 154
2.7 Diagnosis
When the function selection key [DIAGN IN/OUT] is pressed, the following menu is displayed.
ERASE FILE COPY DataSmp MENU
ABS-SRV PLC HISTORY CONFIG MENU
ALARM SERVO SPINDLE PLC-I/F MENU
Menu selection keys
Previous page key
Next page key
Diagnosis menu (No.5 to 8)
Diagnosis menu (No.1 to 4)
Input/output menu (No.1 to 3), Diagnosis menu(No.9)
OPTION
SPINDLE DIAGNOSIS
(
2
)
SPINDLE DIAGNOSIS
SPINDLE MONITOR(4)
SPINDLE MONITOR(3)
SPINDLE MONITOR(2)
SYNCHRONOUS
PS DIAGNOSIS(3)
PS DIAGNOSIS(2)
PS DIAGNOSIS
ハードウェアモニタ
ABS. POSITION SET
S/W MODULE TREE
(2)
SERVO DIAGNOSIS
SERVO MONITOR(4)
SERVO MONITOR(3)
DIAGN menu No.1 to 4
ALARM
MESSAGE
SPINDLE
MONITOR
Refer to the section on data input/output for input/output menu
PLC-I/F
SERVO MONITOR(2)
SERVO
MONITOR
ABS. SERVO
MONITOR
OPERATION
HISTORY
S/W MODULE
TREE
OPERATION
HISTORY
MENU
MENU
BACK NEXT
BACK NEXT
PLC
PLC AXIS
MONITOR
DIAGN menu No.5 to 8
SERVO DIAGNOSIS
(2)
H/W MONITOR
Input/Output menu
No.1 to 3
DIAGN menu No.9
DataSmp
NC-DATA
SAMPLING