2. CNC Monitor Screen
2.6 Data In/Out
I - 145
2.6.1 Program Erase
When the menu [ERASE] is pressed, the PROGRAM ERASE screen is displayed.
User-prepared work programs (main program and subprogram) can be erased in any desired program
number or group units on the PROGRAM ERASE screen.
Data setting range
# Item Explanation
Program
number
specification
Program
group erase
All
program
erase
1
MAIN
PROGRAM
<A>
This is specified to erase data in the
range of work program numbers 1 to
7999 and 10000 to 99999999.
1 to 7999 and
10000 to
99999999
ALL
2
MAIN
PROGRAM
<B>
This is specified to erase data in the
range of standard subprogram 8000
to 8999 mainly prepared by the user.
8000 to 8999 ALL
3
MAIN
PROGRAM
<C>
This is specified to erase data in the
range of custom programs 9000 to
9999 mainly provided by the machine
manufacturer.
9000 to 9999 ALL
CLR
4
FIXED
CYCLE
lthough this is specified to erase a fixed cycle program, normally it cannot be
operated. To erase a fixed cycle program, set the parameter. See Appendix 2
“Registering and Editing Fixed Cycle Programs”. When NC is operated without
setting the parameter, SETTING ERROR occurs.
To Next Page
Loading...
