Mitsubishi C70

6. CNC Data Input/Output
6.4 Operation Windows
III - 32
6.4 Operation Windows
6.4.1 Function Selection Window
Select the function.
<For GT15> <For GT16>
Copy: Inputs/outputs files between CNC and a memory card.
Delete: Deletes files in CNC (machining programs only) and those in a memory card.
Create a directory: Create and name a directory at will in the memory card.
USB Drive Stop: USB drive will be stopped (GT16 only).
6.4.2 Device Selection Window
Select any device.
<For GT15>
<For GT16>
CNC
Selects CNC.
E: USB drive
Selects USB drive (GT16 only).
B: Extend memory card
Selects extend memory card.
A: Built in CF card
Selects built-in CF card.