Mitsubishi FX3U Series User Manual

FX3U Series Programmable Controllers
User’s Manual - Hardwaer Edition
101
6 Examination of System Configuration
6.7 Expansion of Extension Power Supply Unit (FX3U-1PSU-5V)
1
Introduction
2
Features and Part Names
3
Product Introduction
4
Specifications
5
Version and Peripheral Devices
6
System Configuration
7
Input/Output Nos., Unit Nos.
8
Installation
9
Preparation and Power Supply Wiring
10
Input Wiring
3 Determine whether the devices can be added to the extension power supply
unit.
Calculate the current to confirm whether the selected extension devices can be connected.
1. Calculate the current consumption of the built-in 5V DC power supply.
2. Calculate the available current supply from the internal 24V DC power supply.
3. Calculate the available input/output occupied points (excluding the occupied input/output
by special function units/blocks).
If the calculation result for the 5V DC power supply is a negative value, the current consumption exceeds the
power supply capacity.
Reconfigure the system with an extension power supply unit.
If the calculation results for the internal 24V DC power supply and input/output occupied points are negative
values, the actual input/output occupied points exceed the connectable input/output occupied points.
Reconfigure the system with an input/output powered extension unit.
mA
-
mA
Extension power
supply unit
Total of current consumed
by extension devices
Current consumption
Capacity of 5V DC
power supply
mA
≥ 0mA=
Calculation result
5- 1 6- 1
mA
-
mA mA
≥ 0mA=
Current consumption
Power supply
capacity for
internal 24V DC
Calculation result
Extension power
supply unit
Total of current consumed
by extension devices
5- 2 6- 2
points
-
points points
≥ 0points=
Number of I/O
occupied points
Connectable I/O
occupied points
Calculation result
Extension power
supply unit
Total of I/O occupied points
by extension devices
5- 3 6- 3

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)