Mitsubishi S12A2 - Fuel System Installation

8-33
Chapter 8 FUEL SYSTEM
3. Fuel System - Install
Install the parts in the reverse order of the disassemble sequence. (Refer to the illustration for disassembling.)
Clean and dry well the fuel passage.
3.1 Fuel Injection Pump - Install
Fuel Injection Pump - Install
With back stay spec
PTA,PTA2,PTK spec
PTA,PTK,MTK,MPTA,
MPTK spec
Drive case
A
A
58 ± 5.8 N·m
{5.9 ± 0.59 kgf·m}
[42.8 ± 4.28 lbf·ft]
58 ± 2.9 N·m
{5.9 ± 0.3 kgf·m}
[42.8 ± 2.14 lbf·ft]
58 ± 5.8 N·m
{5.9 ± 0.59 kgf·m}
[42.8 ± 4.28 lbf·ft]
58 ± 5.8 N·m
{5.9 ± 0.59 kgf·m}
[42.8 ± 4.28 lbf·ft]
58 ± 5.8 N·m
{5.9 ± 0.59 kgf·m}
[42.8 ± 4.28 lbf·ft]
58 ± 2.9 N·m
{5.9 ± 0.3 kgf·m}
[42.8 ± 2.14 lbf·ft]
34 ± 3.4 N·m
{3.5 ± 0.35 kgf·m}
[25.3 ± 2.53 lbf·ft]
34 ± 3.4 N·m
{3.5 ± 0.35 kgf·m}
[25.3 ± 2.53 lbf·ft]
108 ± 11 N·m
{11 ± 1.1 kgf·m}
[79.6 ± 8 lbf·ft]
108 ± 11 N·m
{11 ± 1.1 kgf·m}
[79.6 ± 8 lbf·ft]