Mitsubishi S12A2 - Inner Ball Bearing Inserting; Oil Seal Installation; Outer Ball Bearing Inserting

10-48
Chapter 10 COOLING SYSTEM
2.19.1 Inner ball bearing - Insert
(1) Apply engine oil to the rolling surface of the ball bear-
ing.
(2) Press-in the bearing to drive shaft with bearing installer.
Inner ball bearing - Insert
2.19.2 Outer ball bearing - Insert
(1) Apply engine oil to the rolling surface of the ball bear-
ing.
(2) Install the drive shaft to fan drive case.
(3) Press-in the bearing to drive shaft with bearing installer.
Outer ball bearing - Insert
2.19.3 Oil Seal - Install
(1) Press-in the oil seal to drive shaft bracket with oil seal
installer.
(2) Apply engine oil to the oil seal lip.
Oil Seal - Install
Application of engine oil
Bearing installer
P/N: 32691-04200
Application
of engine oil
Bearing installer
P/N: 32691-04300
Application of
engine oil
Oil seal installer
P/N: 32591-03100