Mitsubishi S12A2 - Water Pump and Water Pipe - Remove and Inspect

10-14
Chapter 10 COOLING SYSTEM
1.8 Water pump and Water Pipe - Remove and Inspect
Water pump and Water Pipe - Remove and Inspect
1.8.1 Oil Drain Pipe - Remove
The oil drain pipe is located at a hard-to-access position
behind the water pump. Use the water pump wrench to
remove the oil drain pipe.
Oil Drain Pipe - Remove
Replace
MTK,MPTK spec
PTA2 spec
PTAW spec
PTA,PTA2,PTAW,PTK,
MTK,MPTA,MPTK spec
1
2
2
3
4
5
8
10
9
11
6
7
Replace
Replace
Replace
Replace
Replace
Removing Sequence
1 Water pipe
2 Joint
3 Water pipe
4 Joint
5 Stay
6 Connector
7 Water pipe
8 Oil drain pipe
9 Oil pipe
10 Water pump (Approx 33 kg [73 lb])
11 Water pump for air cooler
Oil drain pipe
Water pump
Water pump wrench
P/N:32691-01200