10-50
Chapter 10 COOLING SYSTEM
3. Cooling System - Install
Install the parts in the reverse order of the disassemble sequence.(Refer to the illustration for disassembling.)
Clean and dry well the cooling water passage.
3.1 Water Pipe (Air cooler) - Install
Apply silicone sealant to the both sides of packings between
air cooler in/out connectors and water pipes.
3.2 Tension Pulley - Install
Tighten the tension pulley mounting bolts to the specified
torque.
Tension Pulley - Install
3.3 Water Outlet Pipe - Install
Tighten the water outlet pipe mounting bolts to the specified
torque.
Water Outlet Pipe - Install
108 ± 10.8 N·m
{11 ± 1 .1 kgf·m}
[79.7 ± 7.97 lbf·ft]
Fan tension pulley
Water pump
tension pulley
Water outlet pipe
54 ± 5 N·m
{5.5 ± 0.5 kgf·m}
[39.8 ± 3.69 lbf·ft]
To Next Page
Loading...
