3-7
Chapter 3 SERVICE TOOLS
Cooling
system
Oil seal
installer
32591-03100 Water pump, fan drive oil seal - Press-
in
Unit seal
installer
37191-06300 Water pump unit seal - Install
Water pump wrench 32691-01200 Water pump
Oil drain pipe removal/installation
Bearing installer 32691-04200 Fan drive bearing - Press-in
Bearing installer 32691-04300 Fan drive bearing - Press-in
Fan pulley adapter 32691-07100 Fan Pulley - Lock
Air start system Starter valve adapter 32591-01200 Starter Valve - Remove
Inspection and
measurement
Compression gauge 33A91-01700 Compression Pressure - Measure
Measurement range: 0 to 7 MPa
{0 to 71 kgf/cm
2
} [0 to 1015 psi]
Gauge adapter 36291-02200 Compression Pressure - Measure
U5/8-18
Maintenance
item
Tool name Part No. Illustration Usage
To Next Page
Loading...
