Mitutoyo SJ-301 - Page 100

No. 99MBB091A 5 - 2
■ Relationship between the measurement condition items
● Measured profile and applicable filter
 elbaliavanU:-elbaliavA:
derusaeM
eliforp
retliF
CR257CPSSUAG
P---
R

6774NID

R.FITOM ---
W.FITOM ---
● Restriction if MOTIF.R/MOTIF.W is selected
The number of sampling lengths cannot be selected.
● Relationship between filters and other measurement conditions
dradnatS
eliforpderusaeM
PR 6774NIDR.FITOMW.FITOM
10'SIJSSUAGSSUAG
79'OSISSUAGSSUAG
09'NIDSSUAGSSUAG
49'SIJSSUAGSSUAG
59'
ISNASSUAGSSUAG
28'SIJCR2CR2
● Relationship between the number of sampling lengths and the measured profile
The number of sampling lengths will be modified according to the measured profile being
switched to.
eliforpderusaeMshtgnelgnilpmasforebmuN
P1
R5
6774NID5
R.FITOM)eliforpderusaemehtfotnednepedni(yrartibrA
W.FITOM)
eliforpderusaemehtfotnednepedni(yrartibrA
● Cutoff length and traversing speed
 )ni(mmc
)s/ni(s/mmdeepsgnisrevarT
)300.(80.0)10.(52.0
)10.(52.0)10.(52.0
)30.(8.0)20.(5.0,)10.(52.0
)1.(5.2)2
0.(5.0
)3.(8)20.(5.0
Upper limit length
A mm(in)
Upper limit length
B mm(in)
L (Evaluation length
mm(in))
Traversing speed
mm/s(in/s)
0.02(.001) 0.1(.004)
0.3(.012)≤L≤0.64(.025) 0.25(.01)
0.1(.004) 0.5(.02)
0.7(.028)≤L≤3.2(.126) 0.25(.01), 0.5(.02)
0.5(.02) 2.5(.1)
3.3(.130)≤L≤16(.63) 0.5(.02)