Mitutoyo SJ-301 - Display Unit; Compatible Surface Texture Standard; Measured Profiles and Applicable Filters; Cutoff Length;Sampling Length, Number of Sampling Lengths, and Sampling Interval

No. 99MBB091A 13 - 2
13.3 Display Unit
13.3.1 Compatible surface texture standard
JIS (B 0601-1994, B 0601-1982)
DIN
ISO
ANSI
13.3.2 Measured profiles and applicable filters
eliforpderusaeMretliF
eliforp-R
6774NID
SSUAG
57CP
)noitcerrocesahptuohtiw(CR2
eliforp-P-
eliforp-R.FITOM-
elifo
rp-W.FITOM-
13.3.3 Cutoff length/Sampling length, Number of sampling lengths, and Sampling interval
(htgnelffotuC  1*)c(htgnelgnilpmaS ᐉ)
s
lavretnignilpmaS
selpmasforebmuN
htgnelrep
gnilpmasforebmuN
shtgnel
)"
300.(mm80.0)"300.(mm80.05.2  4.89(m  )ni52.0  48.9(m  )ni0235,3,1
)"10.(mm52.0)"10.(mm52.05.2  4.89(m  )ni52.0  48.9(
m  )ni00015,3,1
)"30.(mm8.0)"30.(mm8.05.2  4.89(m  )ni5.0  96.91(m  )ni00615,3,1
)"1.(mm5.2)"1.(mm5.28 513(m  )ni5.1  1.
95(m  )ni66615,3,1
)"3.(mm8)"3.(mm852  489(m  )ni5 9.691(m  )ni00611
htgnelffotuC:1* c .deificepssieliforp-Rfiseilp
pa
Upper limit length (A) Upper limit length (B) Evaluation length (L) Cutoff length (s) Sampling interval
0.02mm (.001in) 0.1mm (.004in) 0.3mm (.012in)L0.64mm (.025in) 2.5m (98.4in)
2.5m (98.4in)
8m (315in)
0.1mm (.004in) 0.5mm (.02in) 0.7mm (.028in)L3.2mm (.126in)
0.5mm (.02in) 2.5mm (.1in) 3.3mm (.130in)L16mm (.63in)
0.25m (9.84in)
0.5m (19.69in)
1.5m (59.1in)