No. 99MBB091A
3 - 6
3.3 Loading Printer Paper
The printer, which is used to print out measured results, etc., is built into the SJ-301. A roll
of printer paper must be installed in the SJ-301 to use this printer.
■ Loading a roll of printer paper
● Detaching the printer cover
Detach the printer cover on the Display unit to load a roll of printer paper.
1. Turn the Display unit power to off.
2. Hold the printer cover lightly as shown in the figure.
Printer cover
3. Slide the printer cover in the direction of the arrow while lightly pushing the portion A in
the figure.
A
The printer cover will come off.