Mitutoyo SJ-301 - Reading the statistical data

8 - 35 No. 99MBB091A
8. SAVE/READ OF MEASUREMENTS, MEASUREMENT CONDITIONS AND STATISTICAL DATA
8.4.2 Reading the statistical data
The statistical data can be read with the Statistical Processing Condition Setup screen.
The statistical data can only be read from the memory card (optional).
IMPORTANT Multiple files cannot be read at the same time.
NOTE When the statistical data is read, the following conditions will also be read to over-
write the existing SJ-301 settings at the same time.
Measurement conditions, Print conditions, DATA key function setup,
and Calibration conditions
■ Screens displayed when the statistical data is read
STA00 STA01 STA02
ESC
STA03 STA04
STA06 STA07
STA05
STA08
[STAT.]
[Read]
[Enter]
[SHIFT] [Home][SHIFT]
Home screen
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
2
nd Home screen
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
1.54
7.41
2000-01-01
 m
 m
S TAT. I/O
Statistical Processing
Condition Setup screen
Statistical Data Read scree
n
Statistics Statistics Read
Ra
MIN
2.00
MAX
4.00
50
0.20
GO/NG
PA RA
INTER.
TOL.
NUM
ESC
F1 F2 F3 F4
F1 F2 F3 F4