Mitutoyo SJ-301 - Switching the Surface Texture Standard

5 - 3 No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
5.1 Switching the Surface Texture Standard
The SJ-301 is compatible with each of the following surface texture standards: JIS2001,
JIS1994, JIS1982, DIN, ISO, and ANSI.
TIP A currently specified standard is indicated on the Home screen.
NOTE If surface texture standard is switched, the profile filter will also be automatically
switched corresponding to the standard specification.
■ Screen displays when switching the surface texture standard
[STAND.]
Title bar
[Condition]
[Home]
Measurement Condition Setup screen
H
ome screen
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
Standard Setup window
F1 F2 F3 F4
N5
Condition menu
STAND.
PROFILE
FILTER
c
s
EVA-L
RE-CAL.
JIS'94
R
GAUSS
4.0mm
0.8mm
2.5m
Page1/3
Condition menu
STAND.
PROFILE
FILTER
RANGE
SPEED
N
c
RE-CAL.
JIS'94
R
GAUSS
0.8mm
5
AUTO,ESC
0.25mm/s
ON
Page1/3
STAND.
DIN'90 JIS'94
JIS'01
ANSI'95
JIS'82
ISO'97