5 - 9
No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
5.3 Switching the Profile filters
Profile filters can be switched to either of 2RC, PC75, or GAUSS according to the set surface
texture standard.
NOTE Profile filter is automatically switched according to the surface texture standard if it is
switched.
■ Profile filter, surface texture standard, and measured profile
Profile filters will be automatically set according to the surface texture standard and measured
profile selected as tabulated below.
dradnatS
eliforpderusaeM
PR 6774NIDR.FITOMW.FITOM
79'OSISSUAGSSUAG
09'NIDSSUAGSSUAG
10'SIJSSUAGSSUAG
49'SIJSSUAGSSUAG
59'
ISNASSUAGSSUAG
28'SIJCR2CR2
Profile filters can be switched as necessary according to the procedure explained on the
following page.
■ Measured profile and profile filter notion on the screen
eliforpderusaeMscitsiretcarahcretliFnoitatoN
eliforp-R
eliforp-6774NID
retlifnaissuaGSSUAG
)detcerrocesahP(C
R257CP
)detcerroc-tonesahP(CR2RC2
eliforp-PderetlifnU-
R.FITOMderetlifnU-
W.FITOMderetlifnU-
■ Screen displays during switching profile filters
Filter Setup window
[FILTER]
Title bar
[Condition]
[Home]
Measurement Condition Setup screen
ome screen
Condition
JIS1994
GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
m
m
CARD
F1 F2 F3 F4
N5
Condition menu
STAND.
PROFILE
FILTER
c
s
EVA-L
RE-CAL.
JIS'94
R
GAUSS
4.0mm
0.8mm
2.5m
Page1/3
N5
Condition menu
STAND.
PROFILE
FILTER
c
s
EVA-L
RE-CAL.
JIS'94
R
GAUSS
4.0mm
0.8mm
2.5m
Page1/3
FILTER
2CR PC75 GAUSS
To Next Page
Loading...
