Mitutoyo SJ-301 - Modifying the Number of Sampling Lengths

No. 99MBB091A 5 - 18
5.5 Modifying the Number of Sampling Lengths
The SJ-301 sets up an evaluation length (cn) by specifying the number of sampling
lengths to either 1, 3, 5, or L. If L is specified for the number of sampling lengths, the
evaluation length can be set as desired within the range from 0.3 mm(.01") to 12.5mm (.49").
TIP If the profile MOTIF.R/MOTIF.W is selected, the number of the sampling lengths can
not be specified.
■ Measured profile and the number of sampling lengths
Unless otherwise specified, the SJ-301 sets the number of sampling lengths according to the
table below.
eliforpderusaeM)N(shtgnelgnilpmasforebmuN
P1
R5
6774NID5
R.FITOM)eliforpderusaemehtfotnednepedni(yrartibrA
W.FI
TOM)eliforpderusaemehtfotnednepedni(yrartibrA
The number of sampling lengths can be changed as explained on the following pages.
■ Screen displays during changing the number (N) of sampling lengths
Number (N) Setup window
[N]
Title bar
[Condition]
[Home]
Home screen
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
F1 F2 F3 F4
<Measurement Condition
Setup screen>
N5
Condition menu
STAND.
PROFILE
FILTER
c
s
EVA-L
RE-CAL.
JIS'94
R
GAUSS
4.0mm
0.8mm
2.5m
Page1/3
N5
Condition menu
STAND.
PROFILE
FILTER
c
s
EVA-L
RE-CAL.
JIS'94
R
GAUSS
4.0mm
0.8mm
2.5m
Page1/3
N
5
L 0.3mm
13