8
8 - 1
No. 99MBB091A
SAVE/READ OF
MEASUREMENTS,
MEASUREMENT
CONDITIONS AND
STATISTICAL DATA
The SJ-301 has functions to save or read the measurements, measurement conditions, profile
data points, and statistical data.
The above mentioned data can be saved on the following media: on the internal memory of
the Display Unit and on a memory card (optional). However, only measurement conditions
can be saved in the internal memory.
This chapter gives an overview and the procedure for saving/reading this data.
IMPORTANT The multiple files cannot be recalled from the memory at the same time.
NOTE Filename can not include (*). (¥), nor(.).
To Next Page
Loading...
