Mitutoyo SJ-301 - Reading the measured profile data

8 - 30 No. 99MBB091A
8.3.2 Reading the measured profile data
The file of profile data can only be read from the memory card (optional) in the Home
screen.
IMPORTANT Multiple files cannot be recalled at the same time.
NOTE When the stored profile data is read, the following conditions will also be read to
replace the existing SJ-301 settings at the same time.
Measurement conditions, Print conditions, DATA SEL, and Calibration conditions
■ Screens displayed when the profile data is read
[DATA READ]
[Enter]
[Data save
/read]
[Home]
DATA READ
WORK001 WORK002 WORK003
ESC
WORK004 WORK005
WORK007 WORK008
WORK006
WORK009
Measured Profile Data
Read screen
Home screen
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
Data Save/Read screen
Data save/read
DATA SAVE DATA READ
F1 F2 F3 F4
■ Measured profile data read procedure
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
1 <Home screen>
[Data save/read]
2 <Data Save/Read screen>
[Read]
Data save/read
DATA SAVE DATA READ
F1 F2 F3 F4
Touch the [Data save/read] button in the Home screen.
The Save/Read Data screen will appear.
Touch the [Read] button.
The Measured Profile Data Read screen will appear.