Mitutoyo SJ-301 - Page 138

5 - 40 No. 99MBB091A
■ Count Level Setup procedure
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
PC,Sm,Ppi Count Level
(0 100%)
4 5 6
7
10
BS
AC
8 9
%
1 2
0 .
3
ESC
Rq
RSm
(Zp/Zv,
10%
)
* * * *
* * * *
 m
 m
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
CAL.
2004-05-15
CARD
1
<Home screen>
4 <Count Level Input screen>
[%]
[Parameter scroll]
2 <Home screen>
3 <Count Level window>
F1 F2 F3 F4
F1 F2 F3 F4
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ra
CAL.
1.83
7.41
2000-01-01
 m

m
CARD
F2 F3 F4
10
C. LEVEL
%
Zp/Zv
Zt
RSm
Parameter button
Count level button
Definition setup keys
Touch the [Parameter scroll] button in the Home screen
several times until the parameter (Sm, Pc or Ppi) appears in
the button, for which the calculation condition is to be set.
Touch the displayed parameter button.
The Count Level Setup window will appear.
To change the definition of a Profile Element restriction item,
touch the Definition Setup key on the touch panel.
To set a count level, touch the Count Level key.
The Count Level Input screen will appear.
To modify the count level unit, touch the [%] button. Each
time this button is touched, the unit will toggle between [%]
and [m].
The explanation given here assumes that the [%] unit is used.