Mitutoyo SJ-301 - Page 165

5 - 67 No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
5
<Drive Unit Setup windows>
7
<Measurement Condition Setup screen (3/3) >
<Home screen>
6
<Drive Unit Setup windows>
Condition menu
RE-CAL.
ALL
STAND
Page3/3
DRIVE
OFF
Condition menu
RE-CAL.
ALL
STAND
Page3/3
DRIVE
OFF
Condition menu
RE-CAL.
ALL
STAND
Page3/3
DRIVE
OFF
STAND
DRIVE
Condition menu
RE-CAL.
ALL
STAND
Page3/3
DRIVE
OFF
STAND
DRIVE
Touch the [Drive Unit Setup] button to be set.
The touched setup button is highlighted.
Standard drive unit :
STAND
(approach length
0.5mm)
Lateral type drive unit :
STAND
(approach length
0.5mm)
Front escape type drive unit : (approach length
2.5mm)
Touch the title bar on the Drive Unit Setup window to accept
the drive unit setting.
The Measurement Condition Setup screen is restored.
Touch the [Home] button.
The Home screen is restored.