Mitutoyo SJ-301 - Page 198

No. 99MBB091A 7 - 12
■ Setting the print conditions for the statistical
processing results
1
<Statistical Processing Results screen>
[Print setup]
<Statistical Processing Results screen>
Statistics
Ry
2000-01-01
SAMPLE NUM (050)
(050)
2.20 m
14.88 m
19.50 m
10.50 m
100.0%

X
MAX
MIN
PASS RATIO
ESC
2
<Print Form Setup screen>
PRINTER
SAMPLE DATA
CONDITION
HISTOGRAM
RESULT
ESC
[Enter]
Print item ON/OFF button
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Statistics
Ry
2000-01-01
SAMPLE NUM (050)
2.20 m
14.88 m
19.50 m
10.50 m
100.0%

X
MAX
MIN
PASS RATIO
ESC
Touch the [Print setup] button on the Statistical Processing
Results screen.
The Print Form Setup screen will appear.
Use the print item ON/OFF buttons to specify whether each of
the following item is to be printed, then touch the [Enter]
button.
• Sample data (measurements)
• Statistical result
• Histogram
• Conditions (measurement conditions)
Returns to the Statistical Processing Results screen.
■ Printing the statistical processing results
Press the [PRINT] key on the Display Unit while the Statistical Processing Results screen is
active.
[PRINT] key
Items that have been set with the Print Form Setup screen will be printed.