No. 99MBB091A
8 - 12
■ Saving measurement conditions in the memory card
Select the media to save the measurement conditions, then perform the following procedure.
2
<File Name Input screen>
1
<Measurement Condition Save screen>
CARD
Condition SAVE
F. NAME
MEDIA
ESC
SAVE OK?
[F. NAME]
COND????
Condition SAVE
DEF/4 PQR/5 -/6
File name
(max 8 char.)
ABC/7BS
AC
MNO/8 YZ/9
GHI/1 STU/2
JKL/0 VWX/. ¥
*
/3
ESC
C.IN
1
A
[Enter]
[C.IN]
File name input field
Touch the [F. NAME] button in the Measurement Condition
Save screen.
The File Name Input screen will appear.
Input the file name in the file name input field with up to
eight characters, then touch the [Enter] button.
TIP • The operator can add a comment to the
destination file. If this is done, first enter the
file name, then touch the [C.IN] button before
touching the [Enter] button. For more infor-
mation refer to the “● Inputting a comment”
description which follows.
• For information about inputting characters
refer to section 2.2, “Outline of the Touch
Panel”.
Returns to the Measurement Condition Save screen.
To Next Page
Loading...
