Mitutoyo SJ-301 - Page 224

8 - 24 No. 99MBB091A
● Saving profile data points by specifying the file name
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
1 <Home screen>
2 <Data Save/Read screen>
[DATA SAVE]
????????
DATA SAVE
DEF/4 PQR/5 -/6
File name
(max 8 char.)
ABC/7BS
AC
MNO/8 YZ/9
GHI/1 STU/2
JKL/0 VWX/. ¥
*
/3
ESC
C.IN
3 <File Name Input screen>
[Data save/read]
Data save/read
DATA SAVE DATA READ
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
<Home screen>
F1 F2 F3 F4
F1 F2 F3 F4
A
1
File name input field
Touch the [Data save/read] button in the Home screen.
The Data Save/Read screen will appear.
Touch the [DATA SAVE] button.
The File Name Input screen will appear.
In the file name input field, enter a new file name with up to
eight characters, then touch the [Enter] button.
The profile data will be saved and the Home screen will
be restored.
TIP • A comment can be added to the specified
file. To enter a comment, first enter the file
name, then touch the [C.IN] button instead of
the [Enter] button. You can proceed with the
procedure “● Inputting a comment” given on
the following page.
• For information about inputting characters
refer to section 2.2, “Outline of the Touch
Panel”.