8 - 28
No. 99MBB091A
?????
Data file name
DEF/4 PQR/5 -/6
File name
(max 5 char.)
ABC/7BS
AC
MNO/8 YZ/9
GHI/1 STU/2
JKL/0 VWX/. ¥
*
/3
ESC
C.IN
6 <File Name Input screen>
File name input field
DATA KEY SELECT
ESC
OFF
ON
F. NAME
SPC
MEM CARD
OFF
WORK
ON
7 <DATA Key Function Setup screen>
[Home]
[Enter][C.IN]
5 <DATA Key Function Setup screen>
DATA key select
ESC
OFF
ON
F. NAME
SPC
MEM CARD
OFF
ON
[F.NAME]
A
1
Touch the [F. NAME] button.
File Name Input screen will appear.
Input the file name in the file name input field with up to five
characters, then touch the [Enter] button.
TIP • A comment can be added to the specified
file. To enter a comment, first enter the file
name, then touch the [C.IN] button instead of
the [Enter] button. The [C.IN] button brings
up the Comment Input screen. You can
proceed with the procedure “● Inputting a
comment” given on the previous pages.
• See section 2.2 “Outline of the Touch Panel”
about inputting characters.
The DATA Key Function Setup screen is restored.
Touch the [Home] button.
The Home screen is restored, where you can use the
[DATA] key to save the measured profile data.
To Next Page
Loading...
