Mitutoyo SJ-301 - Page 249

9 - 5 No. 99MBB091A
9. SPC OUTPUT AND DATA COMMUNICATION
■ Outputting the measurements
1. Press the DP-1VR/[POWER] buton to turn the DP-1VR on.
Data processor
DP-1VR
[POWER] button
POWER
GO–NG +NG
DATAFEED
CESTAT
LIMIT
TOL.
CL PRINTER POWER
2. Touch the [Parameter scroll] button in the Home screen until the desired parameter for
output appears in the upper region.
[Parameter scroll]
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
Parameter displayed
in the upper region
F1 F2 F3 F4
3. Press the SJ-301/[DATA] key or the DP-1VR/[DATA] button.
[DATA] key
SJ-301
[DATA] button
Data processor
DP-1VR
POWER
GO–NG +NG
DATAFEED
CESTAT
LIMIT
TOL.
CL PRINTER POWER
The measurement data will be outputted from the SJ-301 to the DP-1VR.
TIP For information about statistical data processing with the DP-1VR, refer to its User’s
Manual.