9 - 7
No. 99MBB091A
9. SPC OUTPUT AND DATA COMMUNICATION
■ Connecting the RS-232C cable
Use the optional RS-232C cable to connect the RS-232C connector on the rear of the SJ-301
Display Unit to the RS-232C port on the personal computer.
RS-232C connector
RS-232C cable
SJ-301
RS-232C port
Personal computer
■ Setting the communication conditions on the PC side
Set up the communication conditions of the PC side. The settings to be made are shown in
the following table.
dohtemnoitacinummoC
dohtempots/tratS
deepsnoissimsnarT
spb00882/spb00291/spb0069
stibataD
)dexif(stib8
ytir
aP
NON,DDO,NEVE
tibpotS
stib2rotib1
retemarapX
)dexif(NO
To Next Page
Loading...
