11 - 5
No. 99MBB091A
11. MAINTENANCE AND INSPECTION OF SJ-301
■ Canceling the Detector retraction state
1. Turn on the power.
2. Press the [START/STOP] key.
The Detector will return to its initial position. Releasing in progress is indicated by a bar
on the touch panel.
Origin Restoration
The Home screen will appear after the retraction state mode is canceled.
■ Escape state of the front escape type drive unit
The SJ-301R detector is always escaped to the front before starting measurement. When the
[START/STOP] key is pressed, the SJ-301R drives the detector from the escape position and
starts measurement after passing the escape range.
2 Escaping range
1
NOTE The retraction function is not available with the front escape type drive unit.
To Next Page
Loading...
