Mitutoyo SJ-301 - Page 273

11 - 7 No. 99MBB091A
11. MAINTENANCE AND INSPECTION OF SJ-301
5
<Detector Position Display screen>
6
<Detector Position Display screen>
0.00
m
Deterctor position
ESC Z.SET
0.00
m
Deterctor position
ESC Z.SET
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
* * * *
* * * *
2004-05-13
 m
 m
CARD
F1 F2 F3 F4
Touch the [Front escape] button.
The detector starts moving from the front escape position
to the measurement start position.
If the [Front escape] button is touched with the escape state
released, the SJ-301R restarts escape operation.
TIP Use the above procedure to simply check
whether the stylus is in contact with a measur-
ing surface.
Touch the [Home] button.
The Home screen is restored.