No. 99MBB091A
4 - 32
■ Changing the print magnification
PRINTER
ITEM
PRINT
Ver.
Hor.
AUTO
AUTO
AUTO
ESC
FORM
PRINTER
ITEM
PRINT
Ver.
Hor.
AUTO
AUTO
AUTO
ESC
FORM
PRINTER
ITEM
PRINT
FORM
Ver.
Hor.
AUTO
AUTO
AUTO
ESC
PRINTER
ITEM
PRINT
FORM
Ver.
Hor.
AUTO
10K
200
ESC
Hor.
10 5020
1 52
100 500
1K
200
AUTO
Ver.
1K 5K2K
100 500200
10 5020
50K
100K AUTO
20K
10K
Title bar
Vert mag buttons
[Ver.]
[Hor.]
Title bar
Hori mag buttons
[Home] [ESC] [Enter]
<Printer Setup screen>
<Vertical Mag. Setup window>
<Horizontal Mag. Setup window>
<Printer Setup screen>
Touch the [Ver.] button in the Printer Setup screen to bring up
the Vertical Magnification Setup window.
Touch the [Hor] button to display the Horizontal Magnifica-
tion Setup window.
TIP If the print magnification (vertical and horizon-
tal) of a measured profile is set to [AUTO], the
entire profile is printed. It is convenient to
compare measured profiles of multiple
workpieces if the magnification is fixed.
Touch the title bar after touching the button of the vertical
magnification to be set.
The print magnification is changed, and the Vertical
Magnification Setup window closes.
Touch the title bar after touching the button of the horizontal
magnification to be set.
The print magnification is changed, and the Horizontal
Magnification Setup window closes.
• Touching the [Home] button updates the print magnifica-
tion and the Home screen is restored.
• Touching the [Enter] button updates the print magnifica-
tion and the I/O Condition Setup screen is restored.
• Touching the [ESC] button cancels the new print magnifi-
cation and the I/O Condition Setup screen is restored.
To Next Page
Loading...
