ScreenWorks Software Overview
86 0112-0109 H
Auto Scale
Always
Automatically scales the Detail Graph and Multi-Well
Graph to include all data points of the desired traces
without manual prompting.
Undo
Zoom
Rescales a graph to the original settings.
Manual
Scale
Graph
Opens the Manual Scale Graph dialog to set the
maximum and minimum values for the X- and Y-axis of
the Detail Graph and Multi-Well Graph.
Show/Hide
Data
Toggle button that shows or hides the RLU values for
the selected traces at each read.
Show
Point
Labels
Show Point Labels writes the value of each data point
(for example, RLU value) beside the point on the graph.
Show/Hide
Legends
A toggle button that displays or hides the Detail Graph
legend.
Average/
Overlay
Trace
A toggle button that displays the average or overlay
traces for selected groups.
Average Group—Displays average time point values
for all wells in the selected group. A separate trace is
generated for each read mode.
Note: When Well Selection Mode selected in
the Multi-Well Graph, all traces displayed in the
Detail Graph will be averaged regardless of the
group they are assigned.
Overlay Group—Displays traces for all the wells in
selected groups.
Note: Traces are color-coded by group.
Show/Hide
Standard
Deviation
A toggle button that enables or hides the standard
deviation for the average group trace.
Note: Average Group must be enabled to
access this function.
When Well Selection Mode is selected in the
Multi-Well Graph, all traces displayed in the Detail
Graph will be averaged regardless of the group they
are assigned, and the standard deviation for this
average will be displayed.
Button Name Description
To Next Page
Loading...
Need help?
General
