Using iDockIt B - 3
6. Check Establish network connection and optionally Launch application.
When the MC9190-G is placed in a cradle, iDockIt displays the settings tab corresponding to that cradle. Choose
the type of connection and tap . Alternately, establish a new connection settings before placing the MC9190-G
in the cradle.
Launch Application Upon Connection
To launch an application when connected:
1. Check Enable iDockIt.
2. Tap the tab (Ethernet, Direct or Modem) that corresponds to the type of cradle.
3. Select a connection option as described above.
4. Tap Launch application.
5. Tap Select and select the application to launch when the MC9190-G is placed in the cradle. Enter any
necessary program arguments.
6. Tap OK. The selected application appears in the text box.
View Connection Status
To determine the connection status, tap the Status tab. See Status Tab on page B-9 or Status Tab on page B-17.
Minimize iDockIt
To minimize iDockIt, tap X. iDockIt controls cradle events while minimized.
Exit iDockIt
To close the application, tap Menu > Exit. iDockIt does not control cradle events when closed.
To Next Page
Loading...
