Technical Specifications C - 5
Figure C-4
BatteryMgmt Tab with Threshold Change Checkbox
2. In the Battery Usage Threshold text box, enter a new value.
3. Select the Check to change the Battery Age Threshold to read only field checkbox.
4. Tap Apply.
Tap ok. The new value is set and then the registry key is deleted.
WLAN Default Settings
By default, the WLAN radio is off when the MC9190-G turns on. To change the default setting edit the following
registry key:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WLAN]
"InitialState"=dword:4
where:
dword:4 = WLAN off.
dword:0 = WLAN on.
Warm boot the MC9190-G to have the registry setting take effect.
To Next Page
Loading...
Need help?
General
