B - 12 MC9190-G Integrator Guide
the checkbox next to its title. If the message occurs during a connection attempt, iDockIt allows it and the
event appears in the Status window.
• Port Disconnected - Cannot start communications with the desktop computer. The connection was
terminated.
This message displays when the MC9190-G is removed from a cradle, breaking the connection. Since
this is not really an error, the message can be dismissed automatically.
• Communications Error - Cannot start communications with the desktop computer. The computer is either
not available or busy and currently cannot accept connections.
This message displays when ActiveSync attempts to connect to a host computer and synchronize data
but cannot find the computer name. Since this message may appear in the course of a successful
connection attempt, it can be dismissed automatically.
Ethernet Tab
If using an Ethernet cradle, automatically connect to and sync with a partnered host computer on the network.
Alternatively, establish a generic connection to the network and/or launch a specified application on the
MC9190-G.
Figure B-7
Ethernet Tab
•
Launch ActiveSync - Launches ActiveSync when the MC9190-G in placed in the cradle. ActiveSync
connects to the host computer specified in the Sync with option on the network.
•
Sync with - Selects the host computer with which to ActiveSync. The MC9190-G can have partnerships with
up to two host computers. The drop-down list displays only the host computers with which the MC9190-G
has a partnership.
NOTE Do not use ActiveSync 4.5 or later to synchronize data between a host computer and a Windows CE-based
device through an Ethernet cradle.
NOTE Before selecting this option, connect to the host computer with a serial or USB cable or cradle and use
ActiveSync to set up a partnership with that host computer.
Selecting this option automatically deselects Establish network connection to and Launch application.
Similarly, selecting Establish network connection to or Launch application automatically deselects
Launch ActiveSync.
To Next Page
Loading...
Need help?
General
