Application Deployment for Windows CE 5 - 9
7. Double tap on the file: 9100c60Ben_TEMP.lnk.
8. When the OS Update application finds the appropriate file, it loads the package onto the MC9190-G. A
progress bar displays until the update completes.
9. When complete, the MC9190-G re-boots and the calibration screen appears.
Using an SD Card
To initiate an update using an SD card:
1. Go to the Support Central web site, http://supportcentral.motorola.com.
2. Download the appropriate update package.
3. Copy the update package to the root directory of an SD card (using a host computer).
4. Suspend the MC9190-G.
5. Remove the keypad. See Keypads on page 2-4 for more information.
6. Install the SD card.
7. Replace the keypad. See Keypads on page 2-4 for more information.
8. Connect the MC9190-G to AC power. See Chapter 2, Accessories.
9. Press the Power button to turn on the MC9190-G.
10. Use Windows Explorer to navigate to the SD card folder.
11. Open the OSUpdate folder.
12. Double tap on the file: 9100c60Ben_SD.lnk
13. When the OS Update application finds the appropriate file, it loads the package onto the MC9190-G. A
progress bar displays until the update completes.
14. When complete, the MC9190-G re-boots and the calibration screen appears.
Bootloader
Use Bootloader to download hex files to the MC9190-G from an SD card or from a host computer via USB.
Loading Files From an SD Card
To load the hex files on to the MC9190-G using an SD card:
1. Copy the files to the root directory of an SD card.
2. Remove the keypad. See Keypads on page 2-4.
3. Insert the SD card into the MC9190-G.
4. Install the keypad. See Keypads on page 2-4.
5. Press the primary battery releases. The battery partially ejects from the MC9190-G.
6. Simultaneously press and release the Power button and the trigger.
7. Immediately, as soon as the device starts to boot, press and hold the trigger.
8. Continue to hold the trigger until the Bootloader screen appears.
To Next Page
Loading...
Need help?
General
