Using iDockIt B - 9
3. Enter a name for the connection.
4. In the Modem drop-down list, select the modem type. For the modem cradle, select Hayes Compatible on
COM1.
5. Tap Configure and change any Port Settings in the Device Properties window, depending on requirements
for the modem.
6. Tap OK.
7. Tap Next.
8. Enter the country code, area code and phone number and then tap Next.
9. Enter login information (user name, password, and domain name) and then tap Next.
10. Do not change any TCP/IP settings unless directed by your ISP or network administrator. Tap Next and then
tap Finish. The new modem connection appears in the drop-down list.
Edit an Existing Modem Connection
1. In the Connect using drop-down list, select the modem connection to modify.
2. Tap Edit.
3. In the Connection Properties window, make any necessary changes to the connection name, modem, or
modem configuration options and then tap Next.
4. Change the country code, area code and phone number and then tap Next.
5. Change the login information and then tap Next.
6. Do not change any TCP/IP settings unless directed by your ISP or network administrator. Tap Next and then
tap Finish.
Delete an Existing Modem Connection
1. In the Connect using drop-down list, select the modem connection to delete.
2. Tap and hold the Connect using box until the pop-up menu displays.
3. Select Delete from the pop-up menu.
4. Tap Yes. The modem connection is removed from the drop-down list.
Status Tab
The Status tab displays connection-related events as they occur. Check Display status when cradled on the
General tab to display this tab automatically whenever the MC9190-G is placed in a cradle.
To Next Page
Loading...
Need help?
General
