Motorola MC9190-G Integrator Guide

B - 10 MC9190-G Integrator Guide
Figure B-5 Status Tab
• Dock Status - Indicates Docked and the type of connection (Serial, Ethernet or USB) when the MC9190-G
is cradled or Not docked when the MC9190-G is removed from the cradle.
• Connection - Displays the name of the connection.
• IP Addresses - Displays all valid IP addresses assigned to the MC9190-G. When the MC9190-G is not
cradled, displays either the IP address of the network adapter or, if no network connection, a default IP
address.
• Status window - Displays a scrolling list of cradle events as they occur, including:
• AC power ON and AC power OFF when the MC9190-G is inserted and removed.
• Carrier detect, baud rate, and (cradle type) connect when iDockIt identifies the cradle and connection
speed.
• Launch (application) when iDockIt launches the selected application, followed by confirmation when the
application has been launched successfully.
• Sync done when synchronization has completed successfully.
• Dismiss (error message) when iDockIt dismisses a message you have designated.
• Dock event complete when iDockIt has completed all defined tasks. If the MC9190-G is removed from
the cradle before this item appears, regardless of dock status, you may interrupt assigned tasks.
Tap Clear to delete all events from the status window.

Motorola MC9190-G Specifications

General

Brand	Motorola
Model	MC9190-G
Category	Handhelds
Language	English