5 - 6 MC9190-G Integrator Guide
Deployment
This section provides information about installing software and files on the MC9190-G.
Software deployment can be performed by:
•
Copying files from a host computer
•
Installing programs
•
Updating images.
Copying Files from a Host Computer
To copy files from a host computer to the MC9190-G:
1. Ensure that ActiveSync or Windows Mobile Device Center is installed on the host computer and that a
partnership was created. For more information see, Chapter 3, Synchronization.
2. Connect the MC9190-G to the host computer using a Single Slot Serial/USB cradle or an appropriate cable.
See, Chapter 2, Accessories for connection information.
3. On the host computer, select Start > Programs > ActiveSync.
Figure 5-1
ActiveSync Connected Window
4. Select Explore.
To Next Page
Loading...
