Chapter 1 Getting Started
Introduction
This chapter provides information for setting up the MC9190-G.
Unpacking the MC9190-G
Carefully remove all protective material from around the MC9190-G and save the shipping container for later
storage and shipping.
Verify that you received all equipment listed below:
•
MC9190-G
•
lithium-ion battery
•
strap, attached to the MC9190-G
•
stylus, in the stylus silo
•
Regulatory Guide
•
Quick Start Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Motorola Support Center immediately. See Service Information on page xvi for contact information.
Configuring the MC9190-G
•
To set up ActiveSync to synchronize the MC9190-G with the host computer, see Chapter 3, Synchronization.
•
To configure the MC9190-G for wireless LAN network, see Chapter 4, Wireless Applications.
•
To deploy software on the MC9190-G, see Chapter 5, Application Deployment for Windows CE or Chapter 6,
Application Deployment for Windows Mobiles.
To Next Page
Loading...
