Getting Started 1 - 5
Changing the Keypad Backlight Settings
To change the keypad backlight settings in order to conserve more battery power:
1. On devices with Windows CE 6.0, tap Start > Settings > Control Panel > Keylight icon > Battery Power tab.
or
On devices with Windows Mobile 6.5, tap Start > Settings > System > Keylight > Battery Power.
2. Select the On battery power: Disable keylight if not used for: check box and select a value from the drop-down
list box.
3. Tap the Advanced.
4. Tap the Disable keylight check box to completely turn off the display backlight.
5. Tap the Persist ‘Disable keylight’ setting over reset check box to ensure that the Disable keylight setting is set
after a reset.
6. Tap the Track Backlight State check box to (need information for this).
7. Tap OK.
Turning Off the Radios
On Devices with Mobile 6.5
Windows Mobile 6.5 devices include Wireless Manager, which provides a simple method of enabling, disabling, and
configuring all the device’s wireless capabilities in one place.
To open Wireless Manager, tap the Start Bar and then tap on the Connectivity icon.
Select Wireless Manager.
Figure 1-1
Wireless Manager Window
To enable or disable a wireless connection, tap its blue bar.
To enable or disable all wireless connections, tap and hold the All bar.
To configure settings for a connection, tap Menu.
To Next Page
Loading...
Need help?
General
