Motorola MC9190-G Integrator Guide

C - 4 MC9190-G Integrator Guide
Battery Usage Threshold Setting
By default the Battery Usage Threshold value is set to a pre-defined value (500 by default). To change the
threshold value, a registry key must be created to allow changing this value.
A battery becomes unhealthy when the Battery Usage Indicator reaches a predefined threshold (end of usable life).
Figure C-3 Power BatteryMgmt Tab
Registry Setting
Create the following registry key:
[HKEY_LOCAL_MACHINE\ControlPanel\Power]
“EnableCycleCntThresholdEdit”=DWORD:0
where:
dword:0 = Enable threshold change
Warm boot the MC9190-G to have the registry setting take effect.
1. Tap Start > Settings > System > Power > BatteryMgmt tab.
or Start > Control Panel > Settings > Power > BatteryMgmt tab.
NOTE The point at which a battery becomes unhealthy may vary depending upon the environment and charging
conditions

Motorola MC9190-G Specifications

General

Brand	Motorola
Model	MC9190-G
Category	Handhelds
Language	English