Quick Edit Shortcuts for the Selected Steps
You can also quickly adjust the velocity, pitch, and position of any events via the Quick Edit
shortcuts:
Use the jogwheel and the FUNCTION buttons underneath for the Quick Edit shortcuts.
1. Press and hold the pad(s) of the step(s) you want to edit.
2. To adjust the events’ velocity, press the FUNCTION buttons until the VOLUME indicator
lights up under the jog wheel, and turn the jog wheel.
The adjusted value appears on the left display.
3. To adjust the events’ pitch, press the FUNCTION buttons until the TUNE indicator lights
up under the jog wheel, and turn the jog wheel.
The adjusted value appears on the left display.
4. To finely adjust the events’ position, press the FUNCTION buttons until the SWING indi-
cator lights up under the jog wheel, and turn the jog wheel.
The adjusted value appears on the left display.
5. When you are done, release the pad(s).
Working with Patterns
Recording Patterns with the Step Sequencer
MASCHINE STUDIO - Manual - 373
To Next Page
Loading...
Need help?
General
