5. Use the Page buttons left of the displays to navigate through the Parameter pages of the
selected Channel properties or Plug-in:
Moreover, if there is another page available to the left or to the right of the current page,
the corresponding Page button will be half lit on your controller.
6. Use Knobs 1–8 under the displays to adjust the value of the parameters available on the
selected page. For continuous parameters, hold SHIFT while turning the Knobs to adjust
the values in finer increments.
The displays showing the Audio page from the Group’s OUTPUT properties.
Using the Navigate Mode
Alternatively, you can also navigate Channel properties and Plug-ins along with their Parameter
pages via the Navigate mode of your controller:
Basic Concepts
Common Operations
MASCHINE STUDIO - Manual - 50
To Next Page
Loading...
Need help?
General
