2. At the top left of your controller, press the CHANNEL button to display the Channel prop-
erties or the PLUG-IN button to display the Plug-in slots of the selected Sound, Group or
the Master.
3. Press Button 1 (MASTER), Button 2 (GROUP) or Button 3 (SOUND) to display the Plug-
ins and Channel properties of the Master, the focused Group or the focused Sound, re-
spectively.
4. Press Button 5/6 to navigate the Channel properties or Plug-ins (the name of the selected
Channel properties or Plug-in appears between the left and right arrows under Button 5
and 6).
Upon your selection the parameters of the selected Channel properties or Plug-in are
shown on the displays of your controller.
Basic Concepts
Common Operations
MASCHINE STUDIO - Manual - 49
To Next Page
Loading...
