4. Press SELECT + the unlit pad of the empty Sound you want to use (or simply hit its unlit
pad if pads are in Group mode).
Since we have selected an empty Sound, you see (NONE) under Button 7/8 and these
buttons are inactive (i.e. there are no Plug-ins to navigate yet).
5. Press SHIFT + BROWSE to open the Plug-in Browser and browse the available Instrument
and Effect Plug-ins.
6. Turn Knob 1 (TYPE) to choose between MASCHINE internal instruments and effects (In-
ternal), VST/AU plug-ins from Native Instruments (NI) or VST/AU plug-ins from third-party
manufacturers (External).
7. Turn Knob 2 to set SUBTYPE to Effect.
The right display shows only Effect Plug-ins of the type you have selected.
8. Turn the jog wheel or Knob 5 to browse the available Plug-ins.
9. When you have found the effect you want to use (e.g., the MASCHINE Compressor), press
the jog wheel or Button 8 to load it. You can also use Button 5/6 to step through the list
and load each effect directly.
Using Effects
Creating a Send Effect
MASCHINE STUDIO - Manual - 648
To Next Page
Loading...
Need help?
General
