Native Instruments MASCHINE STUDIO User Manual

Here we describe the procedure in Arrange view. You can also do this in Mix view — see
section ↑8.1.2, Configuring the Main Output of Sounds and Groups.
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to an additional send effect send using AUX 2.
Routing Audio to the Send Effect on the Controller
1. Press the CHANNEL button to enter Control mode and display the Channel properties.
2. If you want to route a Group’s output to the send effect, press Button 2 to select the
GROUP tab, if necessary press SHIFT + the Group button A–H corresponding to the bank
containing the Group, and press the Group button A–H corresponding to the desired
Group.
3. If you want to route a Sound’s output to the send effect, press Button 3 to select the
SOUND tab, select the Group containing that Sound as described in the previous step,
and press SELECT + the pad of that Sound (or simply press its pad if pads are in Group
mode).
4. Press Button 5/6 to select OUTPUT.
The Output properties are shown in the displays of your controller (in the example under-
neath we show the Output properties of a Sound).
Using Effects
Creating a Send Effect
MASCHINE STUDIO - Manual - 650

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English