Native Instruments MASCHINE STUDIO User Manual

▪ The Retrigger setting lets you decide where the next loop will start:
◦ If Retrigger is enabled, the next Section that is selected will be forced to play from
the start. This is useful if you always want your Sections to play from the beginning
regardless of what’s happening elsewhere in the music.
◦ If Retrigger is disabled (default setting), the next Section that is selected will play
from the same offset to the beginning of the Section: e.g., leaving the current Section
on beat 3 will cause the new Section to start playing on its beat 3. This ensures that
the global groove of your track is not interrupted!
13.1.3.1 Jumping to Other Sections in the MASCHINE Software
In the software, the Perform Grid and the Retrigger setting can be adjusted in the MASCHINE
Header:
Adjusting the Perform Grid and Retrigger setting.
►
To adjust the Perform Grid, click the value left of the SYNC label in the MASCHINE
Header and select the desired division from the menu:
Working with the Arranger
Arranger Basics
MASCHINE STUDIO - Manual - 752

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English