Native Instruments MASCHINE STUDIO User Manual

Adjusts the range that will be played when you trigger a note. Adjust the play start and end
points in the Sample via the Start and End parameters. You can also do it by dragging the
white markers labeled S and E on the waveform display (1) using the mouse as described
above.
(6) SELECTION RANGE section
Adjusts the range to which audio processing functions will be applied. You can also select the
range by dragging your mouse on the waveform display (1) as described above.
(7) Audio Toolbar
Provides a set of destructive audio processing functions to modify your Sample. The functions
will be applied to the current selection range. The available functions are described in section
↑14.3.2, Audio Editing Functions below.
You can also edit the play and loop ranges on the Zone page. See section ↑14.5.6, Ad-
justing the Zone Settings for more information.
Using the EDIT Page on Your Controller
►
In Sampling mode, press Button 2 to access the EDIT page.
The EDIT page on the controller.
The right display shows the waveform of the selected Sample:
▪ Turn Knob 5 to zoom in on the waveform of the Sample and Knob 6 to scroll through it.
▪ Above the waveform, the information bar indicates the name and length of the Sample.
Sampling and Sample Mapping
Editing a Sample
MASCHINE STUDIO - Manual - 828

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English