NCR RealPOS - Page 151

Chapter 6: Special Programming 6-19
6. Thescannerthencopiestherequestedclonedatatotheflashdrive.Waituntilit
finishes.
7.
WhenthescannerʹsLEDsstopflashingviolet,waitforfivesecondsuntilthe
beepingsoundsstop.Then,removetheflashdrive.
8.
Inserttheflashdrivetothetargetscanneryouwanttoclone.
The above clone functionality requires the following minimum scanner firmware revision
numbers:

7884: 497-0460386

7878: 497-0461765

7874: 497-0459952

7893: any
For more information on how to use the NCR RealPOS Scanner Flash Drive Prep Tool, please
refer to the NCR RealPOS Scanner Tool Suite Guide (B005-0000-1883) documentation.